Home : Pro Series : Bark Limiter : Beepers : Field Series : Sport Series : Vice Breaker : Batteries : Accessories
| Will the Charger from my Older Remote
Trainer Work with a New Remote Trainer? |
It is important to ensure you are using the right charger with your equipment to prevent
any damage and to charge it properly. Always use the appropriate Tri-Tronics® charger for your unit. For the Sport® S/Classic
S/XLS Series units the charger is a dual-lead 9v charger. This charger has round plugs
that will fit into many older transmitters, however the charge will not be adequate for
the unit to work properly.
For the transmitters of remote
trainers with a round charging jack that were manufactured prior to the Classic S/XLS
units the correct charger will have a plug with a right angle bend in it.
Some older receiver chargers used a
round plug similar to that used today, and although the plug will fit, this type of
charger will not adequately charge the transmitter for use.
If you have questions about the
appropriate charger to be used with your Tri-Tronics® remote trainer, please contact
Customer Service by calling 800-456-4343.
For your convenience, Replacement
Chargers can be purchased through our Online Store
24/7/365.
<<--- Back to FAQ's |
|
